The trick with cooling is to ensure you have a smooth flow of air from one part of the case to the other, preferably opposite sides. Make sure your CPU coolers are blowing in the same direction as well.
It’s a little difficult to see from this image, but it looks like you have almost all your fans - intake and outlet - on one end of the case. This could create a big dead zone at the rear of your case. Especially for your GPU, sandwiched between CPU cooler and PSU. What I would do is move one or more of those fans to the rear, make sure front, rear, and CPU fans are all blowing in the same direction, and see if that helps any.
That thing on the GPU is a anti sag bar I printed it. Front and bottom are intake. Top and back are exhaust. Everything is supposed to be going front to back. I think the top corner fans are creating a dead zone.
I can rearrange my fans to see if that helps. It’s a small case so not many options for configuration.
The trick with cooling is to ensure you have a smooth flow of air from one part of the case to the other, preferably opposite sides. Make sure your CPU coolers are blowing in the same direction as well.
It’s a little difficult to see from this image, but it looks like you have almost all your fans - intake and outlet - on one end of the case. This could create a big dead zone at the rear of your case. Especially for your GPU, sandwiched between CPU cooler and PSU. What I would do is move one or more of those fans to the rear, make sure front, rear, and CPU fans are all blowing in the same direction, and see if that helps any.
That thing on the GPU is a anti sag bar I printed it. Front and bottom are intake. Top and back are exhaust. Everything is supposed to be going front to back. I think the top corner fans are creating a dead zone.
I can rearrange my fans to see if that helps. It’s a small case so not many options for configuration.
I have 3 exhaust. (2 top 1 back) And 3 intake 1 bottom 2 front.
That’s kinda what I’m concerned about is the dead air