I have a gl-inet router on which I have an nginx config to send traffic to Nginx Proxy Manager and DDNS with cloudflare.
I’m trying to get some kind of local dns set up so that if I’m on the local network, traffic stays within the network. The problem that I’m running in to is SSL certificates. NPM (on the server) is handling those and I thought that what I could do is go into the AdGuard Home (on the gl-inet router) config and add a dns rewrite to point to the router and traffic would flow as it normally does.
This DOES work, technically. traceroute shows only one hop for any of my subdomains, ie files.mydomain.com.
But I cannot actually get access in a browser because the ssl certificates are not set up.
It seems like options are: manually copy certificates from the server to the router (not ideal), or don’t do it at all. I notice that if I go to the service by ip address, it’ll change the address to the domain name. Eg going to 192.168.8.111:30027 -> files.mydomain.com.
This isn’t a HUGE deal, but it’s not preferable. How have you all solved this?
Edit: I solved the issue in probably the most hilarious way. I was trying to get the forwarding and everything set up and then borked my routers firewall so bad I couldn’t get to the outside at all, so I did a hard reset.
I then moved my admin UI ports up by one each (81/444), re-set up Goodcloud, ddns, Wireguard server on the router, then set up port forwarding for 80/443 on the router to 80/443 on the trunas server. I switched NPM to listen on those ports (since I moved the web UI to different ports), then added Adguard Home DNS rewrites. It’s now all working as expected.
Local traffic only has one hop and is accessible without SSL warnings, and same for WAN traffic. Thank you all for the help!
You don’t need 2 reverse proxies as others have said. What I did is just add a DNS rewrite entry in my adguardhome instance to point my domain.tld to the LAN IP of my reverse proxy.
Hmm, i may have to get my admin ui’s off of ports 80/443 and port forward with NPM on those ports instead. The reason I was using nginx on the router was so the server could keep the UI on the normal ports and Nginx elsewhere.
I think then I could remove the router Nginx entries and add the DNS rewrite
Do you actually need to move the admin ui off of port 80/443 if you are just forwarding ports? I don’t think you need to. That said I actually don’t know much about port forwarding since I use Tailscale because of CGNAT.
My understanding of port forwarding is that you are forwarding connections to your WAN IP/port to a LAN IP/port. Since the router admin ui is available only on LAN by default, you don’t need to change it’s port from 80/443.
I posted an edit to the post on how I i solved it. Your feedback was helpful in the solution!
I think so. One issue i ran in to is that trying to go anywhere would land on the ui page. If I put npm on ports 80/443, then the UI needs to be elsewhere so I can access it. It shouldn’t be too hard, I hope