Hello everyone!

I’m posting this because I need help upgrading my PC components. However, I don’t know where to start.

Here are my current specs:

Operating system : Nobara Linux

Processor : AMD Ryzen 5 5600, 6x 3500 MHz

CPU cooler : Deepcool Gammaxx C40

Graphic card : ASUS Radeon RX 6800, ASUS TUF-RX6800-O16G-GAMING, 16 GB GDDR6

Motherboard : ASUS TUF B450-PLUS GAMING II

RAM : 32 GB DDR4-RAM, Dual Channel (4x 8 GB), 3200 MHz

Storage :I have several SSDs so that’s fine

Case : Deepcool CL500, black.

Power supply : 750 Watt MSI MPG A750 GF, 90% efficiency (80 Plus Gold certified)

I would like to point out that I play on a 2k 144hz 27" monitor and I want to stick with full AMD because it’s more convenient for me on Linux.

Even though I don’t think there’s a bottleneck, I’m looking to improve my setup primarily because I play The Finals in 2k, and with the graphics on low, I often drop below 80 fps at times (I would like to stay at 120fps).

Thank you for reading!

  • Gueoris@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    1
    ·
    16 hours ago

    I use a single SSD on the M2 port (the one for the OS + files). My games are stored on an SSD connected via Sata.

    Otherwise, my monitor supports AMD FreeSync (I don’t know if that’s what you’re talking about in relation to VRR).

    However, I just noticed that my 4 RAM sticks weren’t exactly the same (I didn’t build the PC).

    This image comes from the CPU-X software. 2x Kingston 99U5428-063.A00LF 2x Kingston KF3200C16D4/8GX

    They are all configured in the same way:

    • Type : DIMM DDR4 Synchronous Unbuffered (Unregistered)
    • Size : 8Go
    • Speed : 3000 MT/s (configured & max)
    • Tension : 1.2V